Build a Ramp Generator Circuit-using 555 Timer IC

while charging of a capaci­tor from a constant current source produces a ramp. This is the idea behind the circuit. The circuit of a ramp generator using timer 555 is shown in figure. Here the resistor of previ­ous circuits is replaced by a PNP transistor that produces a constant charging current.

Ramp Generator Circuit-using 555 Timer IC

Charging current produced by PNP constant current source is

i_C = Vcc-V_E / R_E

where V_E = R₂ / (R1 + R2) * V_CC + V_BE

When a trigger starts the monostable multivibrator timer 555 as shown in figure, the PNP current source forces a constant charging into the capacitor C. The voltage across the capacitor is, therefore, a ramp as illustrated in the figure. The slope of the ramp is given as

Slope, s = I/C